LPG Voltage Regulator Installation Instructions

LPG Voltage Regulator Installation Instructions

When installing LPG voltage regulators, it is necessary to be careful and regular operation. The specific installation requirements are as follows:

1. Before installation of liquefied petroleum gas voltage regulator, it is necessary to test and purge the pipeline to ensure the tightness and cleanliness of the pipeline.

2, liquefied petroleum Gas Regulator should be installed horizontally and vertically on the pipeline, and should pay attention to the flow of the pipeline medium and the direction of the arrow shown on the valve body.

3. Control ball valves should be installed on both sides of the liquefied petroleum gas regulator, and bypass pipes should be installed for maintenance.

4. Pressure gauges should be set on the high and low pressure pipelines of the liquefied petroleum gas voltage regulator for easy adjustment, and the pressure changes before and after the valve can be observed during operation.
5. The safety release valve is set on the pipeline to ensure the reliability and safety of the operation of the LPG voltage regulator.

6, indoor gas pipeline should be installed in the indoor gas leak alarm device, to ensure that when the gas leak danger, can timely alarm and eliminate danger.

7. In order to ensure safe use, after installing the LPG voltage regulator, it is necessary to test the tightness. You can use the leak detector at the interface of all pipelines for detection or brush soapy water and dishwashing liquid water for inspection to observe whether there is leakage. If the pressure gauge is installed before and after the voltage regulator, the air source can be closed, and observe whether the pointer has changed.